Versions Compared

Old Version 15

changes.mady.by.user Ankur Parekh

Saved on

compared with

New Version 16

changes.mady.by.user Mohammed Iqbal

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

Note

The Linux installer comes bundled with the JRE necessary for this Snaplex.

...

  1. As an org admin, log into Manager.
  2. Under Project Spaces on the left, locate the project where you want to create your Groundplex (or the global "shared" project), then select the Snaplexes tab on the right.
  3. Click the Create button and complete the Create dialog (later know known as the Update Snaplex dialog). Once completed, the dialog reopens to the Downloads panel.
  4. Download the RPM/DEB and the configuration file onto a Linux machine. The Downloads panel has links to the installer and config files.

  5. For CentOS (or Redhat) 6.3 or newer, do sudo rpm -i <filename>.rpm.
    For Ubuntu 14.04 or newer, do sudo dpkg -i <filename>.deb.
    where <filename> is the name of the current installer file.  

  6. After the software has been installed, place the downloaded configuration file in the "/opt/snaplogic/etc" directory and make sure the file name ends with .slpropz. Change the slpropz file to be owned by snapuser user, by running:

    Code Block
    sudo chown snapuser:snapuser /opt/snaplogic/etc/myplex.slpropz
sudo chmod 600 /opt/snaplogic/etc/myplex.slpropz


  7. To start the on-premises service, type:  sudo /opt/snaplogic/bin/jcc.sh start

  8. To verify the Snaplex has started, visit https://elastic.snaplogic.com/sl/dashboard.html#Health. The newly install node should show up in the list of nodes for the Snaplex.

...

Info

For Snaplex downloads prior to Fall 2016 (4.7):

  1. Download the RPM/DEB provided by SnapLogic onto a Linux machine.

  2. For CentOS (or Redhat) 6.3 or newer, do sudo rpm -i <filename>.rpm.
    For Ubuntu 14.04 or newer, do sudo dpkg -i <filename>.deb.
    where <filename> is the name of the current installer file.

  3. Copy the keys.properties file provided by SnapLogic onto /opt/snaplogic/etc/keys.properties

  4. Edit /opt/snaplogic/etc/global.properties.
    Update jcc.subscriber_id and jcc.environment to the values provided by SnapLogic.
    You may also change the entry for the Java heap size (jcc.heap.max_size) to whatever the maximum JVM heap space on the machine should be set to. A reasonable heuristic is to set it to 1GB less than the amount of RAM available on the machine.  If you don’t know, leave it as it is; in the future, you may want to check with the SnapLogic team for possible adjustment. 

  5. To start the on-premises service, type:  sudo /opt/snaplogic/bin/jcc.sh start 

  6. To verify the Snaplex has started, visit https://elastic.snaplogic.com/sl/dashboard.html#Health. The newly install node should show up in the list of nodes for the Snaplex.

The RPM installation needs to be performed as the root user. The service startup needs to be done as the root user, the JCC process itself runs as the user snapuser. This allows enhanced security by allowing the keys stored in /etc/snaplogic to be protected from access by regular users. If enhanced encryption is not being used, it is possible to enable the service startup to be done directly as snapuser. To do that, perform steps 1 to 4 as above, then do:

  1. sudo /opt/snaplogic/bin/jcc.sh genkey
  2. sudo chown -R snapuser:snapuser /etc/snaplogic
  3. sudo su - snapuser
  4. /opt/snaplogic/bin/jcc.sh start

The service start and stop can then be done as snapuser without needing root access.

Note

By default, the Snaplex does not automatically restart in the event that the server is rebooted. Your system administrator would need to restart the Snaplex manually per the steps above. Alternatively, you can configure the Snaplex to run as a service to run automatically on startup or reboot.


FeedMaster

You can designate a Groundplex as a FeedMaster by setting the Snaplex node types on the Node Properties panel in the Update Snaplex dialog.

...

Code Block
update-rc.d -f snaplex remove

System Limits

Some Linux installations have system ulimit settings set to low values. This can cause errors when running higher pipeline load on the node. The error usually seen is "java.lang.OutOfMemoryError: unable to create new native thread". To fix this, system limits for the Snapuser user need to be increased. The below can be added in the /etc/security/limits.conf to increase the file and process limits.

Note

The JCC process needs to be restarted after the limits are updated.

...

Code Block
snapuser soft nproc 8192
snapuser hard nproc 65536
snapuser soft nofile 8192
snapuser hard nofile 65536

Groundplex on Azure

When running a Linux Groundplex on Azure, the default TCP keep alive settings on Azure have been seen to cause connectivity issues between the Groundplex and the SnapLogic control plane. The workaround is to disable keep alive in the JCC configuration. Add the following in global.properties and restart the JCC using "/opt/snaplogic/bin/jcc.sh restart"

Code Block
jcc.jvm_options = -Dhttp.keepAlive=False -Dcom.ning.http.client.AsyncHttpClientConfig.allowPoolingConnection=false -Dcom.ning.http.client.AsyncHttpClientConfig.allowSslConnectionPool=false


Note

If you are unable to create an SLDB file using international language characters (such as æ, Æ, Ø) in the file name, update the 'jcc.use_lease_urls' property in the Snaplex's Global Properties to False. This workaround works for all UTF-8 characters, and hence supports all global languages.