Versions Compared

Old Version 28

changes.mady.by.user John Brinckwirth

Saved on

compared with

New Version 29

changes.mady.by.user John Brinckwirth

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

In this Page

Table of Contents
maxLevel2

...

Note
titleGroundplex Installation
  • An on-premise Snaplex is also known as a Groundplex. This document uses the term Groundplex to distinguish this type of Snaplex (on-premise) from other types, such as a Clouplex or an eXtremeplex. Note that in command syntax and throughout the UI, the generic term Snaplex is used.
  • The Linux installer comes bundled with the JRE necessary for this Snaplex. We recommend you use the patch version of Java 11 that is bundled with the installer for your Linux environment. To update your Snaplex to the Java 11, see Upgrading Your Groundplex to Java 11.

...

  1. As an Org-level admin, log into Manager.
  2. Under Project Spaces on the left, locate the project where you want to create your Groundplex (or the global shared project), then select the Snaplexes tab on the right.
  3. Click the Create button and complete the Create dialog (later known as the Updating Snaplex dialog). Once completed, the dialog reopens to the Downloads panel.
  4. Download the RPM/DEB and the configuration file onto a Linux machine. The Downloads panel has links to the installer and config files.

  5. For CentOS (or Redhat) 6.3 or newer, do sudo rpm -i <filename>.rpm.
    For Ubuntu 14.04 or newer, do sudo dpkg -i <filename>.deb.
    where <filename> is the name of the current installer file.  

  6. After the software has been installed, place the downloaded configuration file in the "/opt/snaplogic/etc" directory and make sure the file name ends with .slpropz. Change the slpropz file to be owned by snapuser user, by running:

    Code Block
    sudo chown snapuser:snapuser /opt/snaplogic/etc/myplex.slpropz
sudo chmod 600 /opt/snaplogic/etc/myplex.slpropz


  7. To start the on-premises service, type:  sudo /opt/snaplogic/bin/jcc.sh start

  8. To verify the Snaplex has started, visit https://elastic.snaplogic.com/sl/dashboard.html#Health. The newly install node should show up in the list of nodes for the Snaplex.

...

Info

For Snaplex downloads prior to Fall 2016 (4.7):

  1. Download the RPM/DEB provided by SnapLogic onto a Linux machine.

  2. For CentOS (or Redhat) 6.3 or newer, do sudo rpm -i <filename>.rpm.
    For Ubuntu 14.04 or newer, do sudo dpkg -i <filename>.deb.
    where <filename> is the name of the current installer file.

  3. Copy the keys.properties file provided by SnapLogic onto /opt/snaplogic/etc/keys.properties

  4. Edit /opt/snaplogic/etc/global.properties.
    Update jcc.subscriber_id and jcc.environment to the values provided by SnapLogic.
    You may also change the entry for the Java heap size (jcc.heap.max_size) to whatever the maximum JVM heap space on the machine should be set to. A reasonable heuristic is to set it to 1GB less than the amount of RAM available on the machine.  If you don’t know, leave it as it is; in the future, you may want to check with the SnapLogic team for possible adjustment. 

  5. To start the on-premises service, type:  sudo /opt/snaplogic/bin/jcc.sh start 

  6. To verify the Snaplex has started, visit https://elastic.snaplogic.com/sl/dashboard.html#Health. The newly install node should show up in the list of nodes for the Snaplex.

The RPM installation needs to be performed as the root user. The service startup needs to be done as the root user, the JCC process itself runs as the user snapuser. This allows enhanced security by allowing the keys stored in /etc/snaplogic to be protected from access by regular users. If enhanced encryption is not being used, it is possible to enable the service startup to be done directly as snapuser. To do that, perform steps 1 to 4 as above, then do:

  1. sudo /opt/snaplogic/bin/jcc.sh genkey
  2. sudo chown -R snapuser:snapuser /etc/snaplogic
  3. sudo su - snapuser
  4. /opt/snaplogic/bin/jcc.sh start

The service start and stop can then be done as snapuser without needing root access.

Note

By default, the Snaplex does not automatically restart in the event that the server is rebooted. Your system administrator would need to restart the Snaplex manually per the steps above. Alternatively, you can configure the Snaplex to run as a service to run automatically on startup or reboot.


To set up a FeedMaster

You can designate a Groundplex as a FeedMaster by setting the Snaplex node types on the Node Properties panel in the Update Snaplex dialog. For complete instructions, see Deploying a FeedMaster Node.

...

  1. Get the certificate (.pem) file by using SSH.

  2. Import the file by using the following command in the JCC node:

    Paste code macro
     
/opt/snaplogic/pkgs/jre1.8.0_45/bin/keytool -import -file <path_to_pem_file_from_step_1> -alias <alias_name_optional> -keystore /opt/snaplogic/pkgs/jre1.8.0_45/lib/security/cacerts -vEnter keystore password: changeit


    Note

    This example is an excerpt from 1.8.0_45; the directory path may vary based on the Java installation directory.


  3. Restart the JCC process to confirm the import.

  4. Run the following command to list certificates from the cacerts file:

    Paste code macro
     
/opt/snaplogic/pkgs/jre1.8.0_45/bin/keytool -list --keystore /opt/snaplogic/pkgs/jre1.8.0_45/lib/security/cacerts -v+


...

Code Block
update-rc.d -f snaplex remove

System Limits

Some Linux installations have system ulimit settings set to low values. This can cause errors when running higher pipeline load on the node. The error usually seen is "java.lang.OutOfMemoryError: unable to create new native thread". To fix this, system limits for the Snapuser user need to be increased. The below can be added in the /etc/security/limits.conf to increase the file and process limits.

Note

The JCC process needs to be restarted after the limits are updated.

...

  1. Stop the existing JCC node by running the following command:
    $ sudo /opt/snaplogic/bin/jcc.sh stop

  2. Download the new Snaplex installer and install the Groundplex, running the RPM, DEB, or Docker installers as appropriate.
    • For RPM systems, run the following command:
      $       rpm -U snaplogic-snaplex.rpm
    • For DEB systems, run  the following command:
      $ dpkg -i snaplogic-snaplex.deb
    • For Docker, stop the existing container and start a new container using the latest image.

  3. Add the following entry to the /etc/sysconfig/jcc directory. You must create this directory and file if neither are present. 
    export SL_JAVA_HOME=/opt/snaplogic/pkgs/jdk-11.0.1/

  4. Start the JCC node by running the following command:
    $ sudo /opt/snaplogic/bin/jcc.sh start.

...

  1. Run the following commands after installing the RPM/DEB package:
    1. sudo mv /opt/snaplogic /myopt/myroot
    2. sudo chown -R myuser /myopt/myroot
  2. Add the following entities in the /etc/sysconfig/jcc file. If this file does not exist, create it.
    1. export SL_USER=myuser
    2. export SL_ROOT=/myopt/myroot
  3. Restart the service with the following command: 
    sudo /myopt/myroot/bin/jcc.sh restart
  4. To make a service using init.d, make the /etc/init.d/snaplex file a symlink to the /myopt/myroot/bin/jcc.sh file.

Groundplex on Azure

When running a Linux Groundplex on Azure, the default TCP keep alive settings on Azure have been seen to cause connectivity issues between the Groundplex and the SnapLogic control plane. The workaround is to disable keep alive in the JCC configuration. Add the following in global.properties and restart the JCC using "/opt/snaplogic/bin/jcc.sh restart"

Code Block
jcc.jvm_options = -Dhttp.keepAlive=False -Dcom.ning.http.client.AsyncHttpClientConfig.allowPoolingConnection=false -Dcom.ning.http.client.AsyncHttpClientConfig.allowSslConnectionPool=false


Note

If you are unable to create an SLDB file using international language characters (such as æ, Æ, Ø) in the file name, update the 'jcc.use_lease_urls' property in the Snaplex's Global Properties to False. This workaround works for all UTF-8 characters, and hence supports all global languages.