Versions Compared

Old Version 30

changes.mady.by.user Vidya Patil

Saved on

compared with

New Version Current

changes.mady.by.user Gouri Bhagchandani

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

Overview

This account is used by the Snaps in the Hive Snap Pack. The account can be configured with and without Kerberos and supports SSL connection.

You can create an account from Designer or Manager. In Designer, when building pipelines, every Snap that needs an account prompts you to create a new account or use an existing account. The accounts can be created in or used from:

  • Your private project folder: This folder contains the pipelines that will use the account.
  • Your Project Space’s shared folder: This folder is accessible to all the users that belong to the Project Space.
  • The global shared folder: This folder is accessible to all the users within an organization in the SnapLogic instance.

Account Configuration

In Manager, you can navigate to the required folder and create an account (see Hive Account). To create an account for a generic JDBC driver: 

  1. If not already done, upload the JDBC driver for this database as a file for the specific project.
  2. Click Create, then select Hive > Hive Database Account or Generic Hive Database Account (as required).
  3. Supply an account label.
  4. Supply the necessary properties for your database. 
  5. Supply the necessary JDBC driver jars for your driver.
  6. (Optional) Supply additional information on this account in the Notes field of the Info tab.
  7. Click Apply. 
Warning

Avoid changing account credentials while pipelines using them are in progress. This may lead to unexpected results, including locking the account.

Account Types 

Hive Database Account

Expand
titleHive Database Account

Account Settings

Label

Required. User provided label for the account instance.

Account properties

Hostname

Required. The server address to connect to. 

Default value: None.

Port number

Required. The database server's port to connect to.

Default value: 10000

Database name

Required. The name of the database which the account is to be connected to.
Default value: None.

Username

The username that is allowed to connect to the database.

Example: Snapuser 

Default value: None.

Password

Password used to connect to the data source. Password will be used as the default password when retrieving connections. The password must be valid in order to set up the data source.

Example: Snapuser 

Default value: None.

JDBC jars

List of JDBC JAR files to be loaded. A different driver binary for a driver must have a different name, the same name can not be reused for a different driver. If this property is left blank, a default JDBC driver will be loaded.

Enter the following JDBC jars to configure the Hive Database account for the respective cluster.

For HDP

  • Hive-jdbc-2.0.0.2.3.5.0-81-standalone.jar

  • Zookeeper-3.4.6.jar (Use this for setting up Hive with Zookeeper)

For CDH

  • hive_metastore.jar
  • hive_service.jar
  • hiveJDBC4.jar
  • libfb303-0.9.0.jar
  • libthrift-0.9.0.jar
  • TCLIServiceClient.jar
  • Zookeeper-3.3.6.jar (Use this for setting up Hive with Zookeeper)

Default value: None

Note
  • The JDBC driver can be uploaded through Designer or Manager and it is stored on a per-project basis. That is, only users with access to that project will see JDBC drivers uploaded. To provide access to all users of your org, place the driver in the /shared project.
  • See Advanced Configurations: Configuring Hive with Kerberos section below for a list of JAR files to be uploaded when configuring Hive with Kerberos.

JDBC Driver Class

Required. The JDBC Driver class name. 

For HDP Clusters

Enter the following value: org.apache.hive.jdbc.HiveDriver

For CDH Clusters

Enter the following value: com.cloudera.hive.jdbc4.HS2Driver

Default value: None.

Advanced Properties

           Auto commit

If selected, then batches are immediately committed after they execute. Therefore, only the current executing batch will be rolled back if the Snap fails.
If not selected, then a transaction is started for the Snap run and committed upon run success. The transaction will be rolled back if the Snap fails.

Default value: Selected

Note

For a DB Execute Snap, assume that a stream of documents enter the input view of the Snap and the SQL statement property has JSON paths in the WHERE clause. If the number of documents are large, the Snap executes in more than one batches rather than executing one per each document. Each batch would contain a certain number of WHERE clause values. If Auto commit is turned on, a failure would only roll back the records in the current batch. If Auto commit is turned off, the entire operation would be rolled back. For a single execute statement (with no input view), the setting has no practical effect.

Batch size

Required. Number of statements to execute at a time.
Using a large batch size could use up the JDBC placeholder limit of 2100.

Example: 10

Default value: 50

Fetch size

Required. Number of rows to fetch at a time when executing a query.
Large values could cause the server to run out of memory.

Example: 100

Default value: 100

Max pool size

Required. Maximum number of idle connections a pool will maintain at a time.

Example: 10

Default value: 50

Max life time

Required. Maximum lifetime of a connection in the pool. Ensure that the value you enter is a few seconds shorter than any database or infrastructure-imposed connection time limit. A value of 0 indicates an infinite lifetime, subject to the Idle Timeout value. An in-use connection is never retired. Connections are removed only after they are closed.

Default value: 30

Idle Timeout

Required. The maximum amount of time a connection is allowed to sit idle in the pool. A value of 0 indicates that idle connections are never removed from the pool.

Default value: 5

Checkout timeout

Required. Number of milliseconds to wait for a connection to be available in the pool. Zero waits forever. After set time, then an exception will be thrown and the pipeline will fail.

Example: 10000

Default value: 10000

Url Properties

Properties to use in JDBC Url. These properties will need to be configured when setting up SSL connection. See Advanced Configurations: Configuring Hive with SSL section below for details.

Example: maxAllowedPacket | 1000

Default value: None.

Hadoop properties

Authentication method

Required. Authentication method to use when connecting to the Hadoop service.  

  • None: Allows connection even without the Username and Password
  • Kerberos: Allows connection with Kerberos details such as Client Principal, Keytab file, and Service principal
  • User ID: Allows connection with Username only
  • User ID and Password: Allows connection with Username and Password

Default value: None

Use Zookeeper 

Specifies if Zookeeper be used to locate the Hadoop service instead of a specific hostname.

If the checkbox is selected, use Zookeeper to resolve the location of the database instead of using the hostname field in the standard block.

Default value: Not selected

Note

When using Zookeeper in combination with a Hive account, add the Zookeeper JAR package file on the Groundplex associated with that Hive account. The version of Zookeeper on the Groundplex should be the same as the version your Hive account uses.

For HDP users, in addition to the zookeeper.jar package, you might also require the curator-client-X.X.X.jar and curator-framework-X.X.X.jar package files on the Groundplex.

Zookeeper URL

If you intend to use Zookeeper, then you must provide the following details:

You must provide the URL of the Zookeeper service. Zookeeper URL formats are different for CDH and HDP.

Default value: None

Note

This is NOT the URL for the Hadoop service being sought.

Hive properties

JDBC Subprotocol

Conditional. This is required when the Authentication method is Kerberos. JDBC Subprotocol to be used. The options available are Hive and Impala.

Default value: Hive

Kerberos properties

Configuration information required for the Kerberos authentication. These properties must be configured if you select Kerberos in the Authentication method property.

Client Principal

Used to authenticate to Kerberos KDC (Kerberos Key Distribution Center - Network service used by the clients and servers for authentication). 

Default value: None.

Keytab file

Keytab file(file used to store encryption keys) used to authenticate to Kerberos KDC.

Default value: None.

Service principal

Principal used by an instance of a service.

Examples: 

  • If you are connecting to a specific server:
    hive/host@REALM or impala/host@REALM
  • If you are connecting(more common for the Snap) to any compliant host (see Use Zookeeper property's description) in which case the principal is:
    'hive/_HOST@REALM' or 'impala/_HOST@REALM'. 

Default value: None.

Generic Hive Database Account

Expand
titleGeneric Hive Database Account

Account Settings

Label

Required. User provided label for the account instance.

Account properties

Username

Username that is allowed to connect to the database. Username will be used as the default username when retrieving connections. The username must be valid in order to set up the data source.

Example: Snapuser 

Default value: None.

Password

Password used to connect to the data source. Password will be used as the default password when retrieving connections. The password must be valid in order to set up the data source.

Example: Snapuser 

Default value: None.

JDBC URL

The URL of the JDBC database.

Example: jdbc:hive://hostname/dbname;sasl.qop=auth-int

Default value: None.

JDBC jars

List of JDBC JAR files to be loaded. A different driver binary for a driver must have a different name, the same name can not be reused for a different driver. If this property is left blank, a default JDBC driver will be loaded.

Enter the following JDBC jars to configure the Generic Hive Database account for the concerned cluster.

For HDP

  • Hive-jdbc-2.0.0.2.3.5.0-81-standalone.jar

  • Zookeeper-3.4.6.jar (Use this for setting up Hive with Zookeeper)

For CDH

  • hive_metastore.jar
  • hive_service.jar
  • hiveJDBC4.jar
  • libfb303-0.9.0.jar
  • libthrift-0.9.0.jar
  • TCLIServiceClient.jar
  • Zookeeper-3.3.6.jar (Use this for setting up Hive with Zookeeper)

Default value: None

Note
  • The JDBC driver can be uploaded through Designer or Manager and it is stored on a per-project basis. That is, only users with access to that project will see JDBC drivers uploaded. To provide access to all users of your org, place the driver in the /shared project.
  • See Advanced Configurations: Configuring Hive with Kerberos section below for a list of JAR files to be uploaded when configuring Hive with Kerberos.

JDBC Driver Class

Required. The JDBC Driver class name. 

For HDP Clusters

Enter the following value: org.apache.hive.jdbc.HiveDriver

For CDH Clusters

Enter the following value: com.cloudera.hive.jdbc4.HS2Driver

Default value: None.

Advanced Properties

           Auto commit

If true (selected), then batches are immediately committed after they execute. Therefore, only the current executing batch will be rolled back if the Snap fails.
If false (not selected), then a transaction is started for the Snap run and committed upon run success. The transaction will be rolled back if the Snap fails.

Default value: Selected

Note

For a DB Execute Snap, assume that a stream of documents enter the input view of the Snap and the SQL statement property has JSON paths in the WHERE clause. If the number of documents are large, the Snap executes in more than one batches rather than executing one per each document. Each batch would contain a certain number of WHERE clause values. If Auto commit is turned on, a failure would only roll back the records in the current batch. If Auto commit is turned off, the entire operation would be rolled back. For a single execute statement (with no input view), the setting has no practical effect.

Batch size

Required. Number of statements to execute at a time.
Using a large batch size could use up the JDBC placeholder limit of 2100.

Example: 10

Default value: 50

Fetch size

Required. Number of rows to fetch at a time when executing a query.
Large values could cause the server to run out of memory.

Example: 100

Default value: 100

Max pool size

Required. Maximum number of idle connections a pool will maintain at a time.

Example: 10

Default value: 50

Max idle time

Required. Minutes a connection can exist in the pool before it is destroyed.

Example: 30

Default value: 30

Idle connection Test period
Required. Number of minutes for a connection to remain idle before a test query is run. This helps keep database connections from timing out.
Default value: 5Checkout timeout

Required. Number of milliseconds to wait for a connection to be available in the pool. Zero waits forever. After set time, then an exception will be thrown and the pipeline will fail.

Example: 10000

Default value: 10000

Url Properties

Properties to use in JDBC Url. These properties will need to be configured when setting up SSL connection. See Advanced Configurations: Configuring Hive with SSL section below for details.

Example: maxAllowedPacket | 1000

Default value: None.

Hadoop Properties

Authentication method

Required. Authentication method to use when connecting to the Hadoop service.  

  • None: Allows connection even without the Username and Password
  • Kerberos: Allows connection with Kerberos details such as Client Principal, Keytab file, and Service principal
  • User ID: Allows connection with Username only
  • User ID and Password: Allows connection with Username and Password

Default value: None

Use Zookeeper 

Specifies if Zookeeper be used to locate the Hadoop service instead of a specific hostname.

If the checkbox is selected, use Zookeeper to resolve the location of the database instead of using the hostname field in the standard block.

Default value: Not selected

Note
titleZookeeper Versions

When using Zookeeper in combination with a Hive account, add the Zookeeper JAR package file on the Groundplex associated with that Hive account. The version of Zookeeper on the Groundplex should be the same as the version your Hive account uses.

For HDP users, in addition to the zookeeper.jar package, you might also require the curator-client-X.X.X.jar and curator-framework-X.X.X.jar package files on the Groundplex.

Zoo Keeper URL

If you intend to use Zookeeper, then you must provide the following details:

You must provide the URL of the Zookeeper service. Zookeeper URL formats are different for CDH and HDP.

Default value: None

Note

This is NOT the URL for the Hadoop service being sought.

Hive properties

JDBC Subprotocol

Conditional. This is required when the Authentication method is Kerberos. JDBC Subprotocol to be used. The options available are Hive and Impala.

Default value: Hive

Kerberos properties

Configuration information required for the Kerberos authentication. These properties must be configured if you select Kerberos in the Authentication method property.

Client Principal

Used to authenticate to Kerberos KDC (Kerberos Key Distribution Center - Network service used by the clients and servers for authentication). 

Default value: None.

Keytab file

Keytab file(file used to store encryption keys) used to authenticate to Kerberos KDC.

Default value: None.

Service principal

Principal used by an instance of a service.

Examples: 

  • If you are connecting to a specific server:
    hive/host@REALM or impala/host@REALM
  • If you are connecting(more common for the Snap) to any compliant host (see Use Zookeeper property's description) in which case the principal is:
    'hive/_HOST@REALM' or 'impala/_HOST@REALM'. 
Default value: None

In this article

Table of Contents
maxLevel2
absoluteUrltrue
excludeOlder Versions|Additional Resources|Related Links|Related Information

In this section

Child pages (Children Display)

Overview

You must create Hive accounts to connect to data sources that you want to use in your Pipelines. You can configure your Teams accounts in SnapLogic using either the Designer or Manager.

For more information on SnapLogic Accounts, refer to Accounts.            

Configuring Hive Accounts Using SnapLogic Designer

Drag a Hive Snap to the Canvas and click the Snap to open its settings. Click the Account tab. You can now either use an existing account or create a new one.

Selecting an existing account

SnapLogic organizes and displays all accounts to which you have access, sorting them by account type and location. To select an existing account:

  1. In the Account tab, click the dropdown(blue star)  icon to view the accounts to which you have access, and select the account that you want to use.

  2. Click the Save (blue star) icon.

Image Added

Creating an account

  1. In the Account tab, click Add Account below the Account Reference field.

  2. Select the Location in which you want to create the account, select the Account Type, and click Continue. The Add Account dialog window associated with the account type is displayed.

    Image Added

  3. Enter the required account details. For detailed guidance on how to provide the information required for each account type, refer to Generic Hive Database Account and Hive Database Account.

  4. Click Validate to verify the account, if the account type supports validation.

  5. Click Apply to complete configuring the Hive account.

Info

Enter additional information on this account in the Notes field of the Info tab. This will help you–and other users–understand the purpose of the account, especially if there are multiple accounts of the same type.

Configuring Hive Accounts Using SnapLogic Manager

You can use Manager to create accounts without associating them immediately with Pipelines.

Accounts in SnapLogic are associated with projects. You can use accounts created in other projects only if you have at least Read access to them.

  1. In the left pane, browse to the project in which you want to create the account and click (blue star) > Account > Hive, followed by the appropriate account type. The Create Account dialog associated with the selected account type is displayed.

    Image Added

  2. Repeat the steps numbered 3 through 5 in the Creating an account section. 

Avoid updating account credentials while Pipelines using that account are executing. Doing so may lead to unexpected results, including your account getting locked.

Additional Configurations

Configuring Hive with SSL

The following URL properties have to be configured:

Add the following properties to the Url properties table to configure Hive with SSL. These configurations work only with Groundplexes and not Cloudplexes.

URL Property Name

URL Property Value

ssl

Required. Binary value to denote that SSL is enabled. This value must always be 1.

sslTrustStore

Required.

The

 The path of

the

SSL

trust store in the SLDB

Trust store key file pointing to a JKS, PEM or CER file. The file can be referenced from the Groundplex's file system.

sslTrustStorePassword

Required. Password configured for the SSL

trust

Trust store.

AllowSelfSignedCerts

Binary value to denote

that server is allowed

whether the driver allows the server to use self-signed SSL certificates

by the driver. 

. Pass the value 1 to allow the use.

CAIssuedCertNamesMismatch

Binary value to denote that the driver requires the CA issued SSL certificate's name

is required by the driver

to match the host name of the Hive server.

 note

 Pass the value 1 to indicate the names must match.

Info

The above list is specific to Hive with or without Kerberos enabled. With Kerberos enabled, the properties such as Client Principal, Key tab file and Service principal have to be additionally provided.

Limitations or known issues

  • "Method not supported" error while validating Apache Hive JDBC v1.2.1 or earlier
    The Hive Snap Pack does not validate with Apache Hive JDBC v1.2.1 jars or earlier because of a defect in Hive. HDP 2.6.3 and HDP 2.6.1 run on Apache Hive JDBC v1.2.1 jars.
    To validate Snaps that must work with HDP 2.6.3 and HDP 2.6.1, use JDBC v2.0.0 jars.

Testing Environment

Hive Version: Hive 1.1.0, Hive 1.2.0

Supported Versions

  • Hive Version: Hive 1.1.0, Hive 1.2.0, Hive 3.1.3

  • Hive with Kerberos works only on Hive JDBC4 driver 2.5.12 and above 

Hive with Kerberos is tested on Hadooplex only

  • Hive with SSL works only on Hive JDBC4 driver 2.5.12 and above.

  • Cluster Versions: CDH 5.

8

  • 16, CDH

5

  • 6.1.

10

  • 1 , HDP

2

  • 3.

6

  • 1.

1

  • 4, HDP 2.6

.3  Panel
borderColorblack
borderWidth1
borderStylesolid
titleAccount History

4.14 (snapsmrc490)

  • Added a new account type: Generic Hive Database Account, this enables connecting to different types of clusters using JDBC URL.

4.8.0 

  • Info tab added to accounts.

  • Database accounts now invalidate connection pools if account properties are modified and login attempts fail.

4.7.0

Enabled the account with Kerberos authentication.

  • .5, CDP 7.1.7

Snap Pack History

Expand

Insert excerpt
Hive Snap Pack
Hive Snap Pack
nameHive_SPH
nopaneltrue

Related Content