This document helps users migrate from the field-developed Microsoft Dynamics AX Snap Pack to the product version of the Microsoft Dynamics AX Snap Pack. The list below provides the information on each item with reference to the Field and the productized versionProduct versions. For more information, refer our product documentation site. to Microsoft Dynamics AX Snap Pack.

Migration to the Productized Snap Packs

Before the migration begins, it is important to identify and note notice if the Snap to which you are migrating consists of the same FQID as before, or if there's a different version (your new version. See below for details. Your Technical Account Manager would assist the process)can assist you with this. 

Fully-Qualified ID (FQID) for a Snap

The FQID is used to uniquely identify the Snap. It consists of the Snap class ID and the class version and can be located on the Info section . The FQID appears on the Info tab of the Snap.

Typically, a migration for a Snap will go from "<class_id>_<class_version>" to "<class_id>_<class_version + 1>". The During migration, the Snap is updated with its version to match the incremented class version.  Also, the steps for the process of migration depends on whether or not the Snap gets The steps you take to migrate a Snap depend on whether a Product Snap has the same FQID as that of the Field Snap.

Locating the FQID for a Snap

Go to Open the Info tab on the Snap to locate the Class FQID. In the following screen shots, note If the FQIDs are same for the Field and the productized Product Snap respectively(for example, com-snaplogic-snaps-msdynamicsax-create_1, meaning the). The <class_id>_<class_version> are the same. The productized Snaps with different FQIDs would If the FQIDs are not the same, the Product Snap would typically have an incremented version number (<class_id>_<class_version + 1>for example, com-snaplogic-snaps-msdynamicsax-create_2).

The following images display the FQIDs (highlighted) being the same for the AX Create Snap on the Field and the productized versions respectively. Note show an example of the AX Create Snap. The Field version is on the right and the Product version is on the left. The FQIDs are the same for both versions. Note that 'A51' and 'snapsrc890'  are the Snap Pack versions that change with every build. 

          

The respective steps are enumerated below:

 Steps to migrate

Migrating from the Field to the

Product Versions with a

Different FQID

1. Subscribe to the Product Snap Pack. Your Technical Account Manager will initiate

1. this process and inform when

1. the Product version is enabled.
   1. Log in to SnapLogic as an org administrator.
   2. Navigate to Manager > Organizations. 
   3. Select the desired Product Snap Pack. 
2. Refresh the application. The Product Snap Pack is displayed in the Snaps catalog.
3. Get the list of pipelines to

1. be updated from all the projects.
2. Make a note of the account and the Snap configuration in each impacted pipeline for the Field Snap Pack (for example, 18 pipelines).
3. Create the new accounts in the pipelines or from the Manager interface.

1. For all

1. existing pipelines that have a Field Snap, update the pipelines with the

1. respective Product Snap:
   1. Drag

1. 1. the Product Snap from the catalog

1. 1. .
   2. Configure the Accounts/properties

1. 1. for the Product Snap.
   2. Replace the Field Snap with

1. 1. the Product Snap.
   2. Validate the pipeline.
   3. Repeat

1. 1. these steps for all the impacted pipelines.

1. Navigate to

1. Manager > Snap Statistics and note the total number of pipelines

1. associated with the Field and

1. the Product Snap Packs

1. . If the migration is complete and you have successfully updated all the Snaps:
   • The total number of pipelines associated with the Product Snap Pack should

1. • match the total number of pipelines

1. • that were associated with the Field Snap Pack

1. • in step 4. (for example, 18 pipelines)

1. • .
   • The Field Snap Pack

1. • should show  '0 pipelines'

1. • - to indicate the Field Snap Pack is no longer used in any pipeline.
2. Delete the Field Snap Pack from

1. SnapLogic Manager: 
   1. Find the project in which the Field Snap Pack is located

1. 1. .
   2. Delete the Field Snap Pack and then

1. 1. delete the old accounts. 

Microsoft Dynamics AX Account 

The productized The Product On-premises version of Dynamics AX Snap Pack consists of account that support the On-Premises: 

• • Dynamics AX NTLM account

UI changes on the Productized the Product version

• There is only one account currently on the productized the Product version and be provided with the respective settings.
• The dynamic accounts for the Dynamics AX Snap Pack are available for the productized the Product version, however, the values are passed using the pipeline parameters. 

Microsoft Dynamics AX NTLM account

Refer the Dynamics AX Accounts for more information.

• The * mark in the property represents as mandatory Fields
• Pass the values dynamically using the pipeline parameters for the Dynamic Account (view the screenshots in the above Account section) 

Microsoft Dynamics AX Create 

The Dynamics AX Create Snap creates records in Dynamics AX instance. This Snap uses Microsoft Dynamics AX Application Integration Framework (AIF) to communicate with Microsoft Dynamics AX 2012 servers. 

Refer the Documentation Dynamics AX Create to know more about the productized the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, go to the Snap in the pipelines and configure the new properties as required.
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.
• Verify the Info section, the productized the Product AX Create Snap appears with the updated FQID and the Snap Pack build number. 
• The output preview displays the Original data and the result (Key Field and Value) for the Productized the Product Snap.

Microsoft Dynamics AX Delete

The Dynamics AX Delete Snap deletes records from the Dynamics AX instance according to a specific ID key and ID value.

Refer the Documentation Dynamics AX Delete here to know more about the productized the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, go to the Snap in the pipelines and configure the new properties as required.
• The target schema is non suggestible for the productized the Product Delete Snap (suggestible for the Field Snap), however, the ID value is passed directly into the Snap or can pass the values via an upstream by enabling the expressions for the Id key and Id value properties in the Snap. 
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.
• Verify the Info section, the productized the Product AX Delete Snap appears with the updated FQID and the Snap Pack build number. 
• The output preview displays the Original data and the result ( Key Field and Value) for the Productized the Product Snap.

Microsoft Dynamics AX Read

This Dynamics AX Read Snap reads record from the Dynamics AX instance according to a specific ID key and ID value.

Refer the Documentation Dynamics AX Read here to know more about the productized the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, go to the Snap in the pipelines and configure the new properties as required.
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.
• Verify the Info section, the productized the Product AX Read Snap appears with the updated FQID and the Snap Pack build number. 
• The output preview displays the Original data and the result ( Key Field and Value) for the Productized the Product Snap.
• The target schema is non suggestible for the productized the Product Read Snap (suggestible for the Field Snap), however, the ID value is passed directly into the Snap or can pass the values via an upstream by enabling the expressions for the Id key and Id value properties in the Snap. 

Microsoft Dynamics AX Search 

The productized The Product AX Search Snap searches records from Dynamics AX 2012 instance using identifiers such as Company, Object Type, and so on based on specified search queries.

Refer the Documentation Dynamics AX Search here to know more about the productized the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, go to the Snap in the pipelines and configure the new properties as required.
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.
• Verify the Info section, the productized the Product AX Search Snap appears with the updated FQID and the Snap Pack build number. 
• The output preview displays the Original data and the result ( Key Field and Value) for the Productized the Product Snap.
• The target schema is non suggestible for the productized the Product Read Snap (suggestible for the Field Snap), however, the ID value is passed directly into the Snap or can pass the values via an upstream by enabling the expressions for the Id key and Id value properties in the Snap. 

Microsoft Dynamics AX Update

The Dynamics AX Update Snap Updates an existing record in the Dynamics AX instance.

Refer the Documentation Dynamics AX Update here to know more about the productized the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, go to the Snap in the pipelines and configure the new properties as required.
• Verify the Info section, the productized the Product AX Update Snap appears with the updated FQID and the Snap Pack build number.   
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.
• The output preview displays the Original data and the result (Key Field and Value) for the Productized the Product Snap.

Microsoft Dynamics AX Execute

This Dynamics AX Execute Snap calls the Dynamics AX AIF endpoint using the incoming data and writes out a SOAP response. This is a new Snap in the productized the Product MS Dyamics AX Snap Pack.

Refer the Documentation Dynamics AX Execute here to know more about the productized the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, drag the Snap on the canvas and configure the new properties as required.
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute. 

Important Notes

• Reload the Designer page after deleting the Field Snap pack so the latest version is displayed on the catalog.
• Verify and validate the accounts for all the Snaps.
• Verify the Info section in all the Snaps for the latest FQIDs.  
• Note to provide the mandatory fields such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.