...
Log into the Groundplex host machine.
Navigate to the
/opt/snaplogic/bindirectory.Depending on your host operating system, use one of the following commands to start the diagnostic utility on the Snaplogic node:
Linux:./jcc.sh diagnostic
Windows:jcc.bat diagnostic
As the diagnostic utility starts, the following message appears:Starting Snaplogic Snaplex in diagnostics mode:In a few minutes, when the report is complete, the following message appears:
A diagnostic report has been generated at: C:\opt\snaplogic\run\log\diagnostic_report.htmlTo view the report, do one or more of the following steps:
For the Linux environment, the diagnostic report is embedded into the terminal.
Use the SCP command in the Linux environment to view the report page from your local machine. This is shown in the following file.:
diagnostic_Diagnostic report (2).htmlIn the Windows environment, open the report in a web browser to see if there are any issues. Form For example:
...
See Also
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...