On this Page

This document helps users migrate from the field-developed Microsoft Dynamics AX Snap Pack to the product version of the Microsoft Dynamics AX Snap Pack. The list below provides the information on each item with reference to the Field and Product versions. For more information, refer to Microsoft Dynamics AX Snap Pack.

Migration to the

Product Snap Packs

Before the migration begins, notice if the Snap to which you are migrating consists of the same FQID as before, or if there's a new version. See below for details. Your Technical Account Manager can assist you with this. 

Fully-Qualified ID (FQID) for a Snap

The FQID is used to uniquely identify the Snap. It consists of the Snap class ID and the class version. The FQID appears on the Info tab of the Snap.

Typically, a migration for a Snap will go from "<class_id>_<class_version>" to "<class_id>_<class_version + 1>". During migration, the Snap is updated with its version to match the incremented class version. The steps you take to migrate a Snap depend on whether a Product Snap has the same FQID as that of the Field Snap.

Locating the FQID for a Snap

Open the Info tab on the Snap to locate the Class FQID. If the FQIDs are same for the Field and the Product Snap (for example, com-snaplogic-snaps-msdynamicsax-create_1). The <class_id>_<class_version> are the same. If the FQIDs are not the same, the Product Snap would typically have an incremented version number (for example, com-snaplogic-snaps-msdynamicsax-create_2).

The following images show an example of the AX Create Snap. The Field version is on the right and the Product version is on the left. The FQIDs are the same for both versions. Note that 'A51' and 'snapsrc890'  are the Snap Pack versions that change with every build. 

          

Migrating from the Field to the Product Versions with a Different FQID

1. Subscribe to the Product Snap Pack. Your Technical Account Manager will initiate this process and inform when the Product version is enabled.
   1. Log in to SnapLogic as an org administrator.
   2. Navigate to Manager > Organizations. 
   3. Select the desired Product Snap Pack. 
2. Refresh the application. The Product Snap Pack is displayed in the Snaps catalog.
3. Get the list of pipelines to be updated from all the projects.
4. Make a note of the account and the Snap configuration in each impacted pipeline for the Field Snap Pack (for example, 18 pipelines).
5. Create the new accounts in the pipelines or from the Manager interface.
6. For all existing pipelines that have a Field Snap, update the pipelines with the respective Product Snap:
   1. Drag the Product Snap from the catalog.
   2. Configure the Accounts/properties for the Product Snap.
   3. Replace the Field Snap with the Product Snap.
   4. Validate the pipeline.
   5. Repeat these steps for all the impacted pipelines.
7. Navigate to Manager > Snap Statistics and note the total number of pipelines associated with the Field and the Product Snap Packs. If the migration is complete and you have successfully updated all the Snaps:
   • The total number of pipelines associated with the Product Snap Pack should match the total number of pipelines that were associated with the Field Snap Pack in step 4. (for example, 18 pipelines).
   • The Field Snap Pack should show  '0 pipelines' - to indicate the Field Snap Pack is no longer used in any pipeline.
8. Delete the Field Snap Pack from SnapLogic Manager: 
   1. Find the project in which the Field Snap Pack is located.
   2. Delete the Field Snap Pack and then delete the old accounts. 

Microsoft Dynamics AX Account 

The Product On-premises version of Dynamics AX Snap Pack consists of an account that support the On-Premises: 

• • Dynamics AX NTLM account

UI

Changes on the Product

 Version

• There is only one account currently on the Product version and be version as mentioned above. This account can be selected and provided with the respective account settings.
• The dynamic accounts for the Dynamics AX Snap Pack are available for the Product version, however, the . The values are passed using the pipeline parameters. 

Account Settings

Refer to the Dynamics AX Accounts for  Snap for more information.

• The * mark in the property represents as indicates mandatory FieldsPass the values fields.
• Values (Username, Password, and Domain) are passed dynamically using the pipeline parameters for the Dynamic Account (view the screenshots in the above Account section). See above for details. 

Microsoft Dynamics AX Create 

The Dynamics AX Create Snap creates records in the Dynamics AX instance. This Snap uses Microsoft Dynamics AX Application Integration Framework (AIF) to communicate with Microsoft Dynamics AX 2012 servers. 

Refer the Documentation to Dynamics AX Create to know  for more information about the this Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, then go to the Snap in the pipelines  and and configure the new properties as required.
• Note to Make sure to provide the mandatory fields (such as AIF Endpoint , and Object Type, ID Key and so on for ) to enable the pipeline to validate/execute.
• Verify the Info section, the Product AX Create Snap appears with . Make sure the updated FQID and the Snap Pack build number match the Product Snap. 
• The Make sure the the output preview displays the Original data and the result (Key Field and Value) for the Product Snap.
  

Microsoft Dynamics AX Delete

The Dynamics AX Delete Snap deletes records from the Dynamics AX instance according to a specific ID key and ID value.

Refer the Documentation to Dynamics AX Delete here to know  for more information about the this Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, then go to the Snap in the pipelines and pipelines and configure the new properties as required.
• The target schema is non suggestible for the Product Delete Snap (was suggestible for the Field Snap), however, but it is not suggestible for the Product Snap. However, the ID Id value is passed directly into the Snap or can pass the values . Or, values can be passed via an upstream by enabling Snap if you enable the expressions for the Id key and Id value properties in the Snap. 
• Note to Make sure to provide the mandatory fields (such as AIF Endpoint, Object Type, ID Key and so on for Id key, and Id value) to enable the pipeline to validate/execute.
• Verify the Info section, the Product AX Delete Snap appears with . Make sure the updated FQID and the Snap Pack build number match the Product Snap. 
• The Make sure the the output preview displays the Original data and the result (Key Field and Value) for the Product Snap.

Microsoft Dynamics AX Read

This Dynamics AX Read Snap reads record from the Dynamics AX instance according to a specific ID key and ID value.

Refer the Documentation to Dynamics AX Read here to know for more information about the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, then go to the Snap in the pipelines  and and configure the new properties as required.
• The target schema was suggestible for the Field Snap, but it is not suggestible for the Product Snap. Note to However, the Id value is passed directly into the Snap. Or, values can be passed via an upstream Snap if you enable the expressions for the Id key and Id value properties in the Snap. 
• Make sure to provide the mandatory fields (such as AIF Endpoint , and Object Type, ID Key and so on for ) to enable the pipeline to validate/execute.
• Verify the Info section, the Product AX Read Snap appears with . Make sure the updated FQID and the Snap Pack build number match the Product Snap. 
• The Make sure the the output preview displays the Original data and the result (Key Field and Value) for the Product Snap.The target schema is non suggestible for the Product Read Snap (suggestible for the Field Snap), however, the ID value is passed directly into the Snap or can pass the values via an upstream by enabling the expressions for the Id key and Id value properties in the Snap. 
  

Microsoft Dynamics AX Search 

The Product AX Search Snap searches records from the Dynamics AX 2012 instance. The search queries are specified by using identifiers such as Company, Object Type, and so on based on specified search queries.

Refer the Documentation to Dynamics AX Search here to know  for more information about the Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, then go to the Snap in the pipelines  and and configure the new properties as required.
• Note to Make sure to provide the mandatory fields (such as AIF Endpoint , and Object Type, ID Key and so on for ) to enable the pipeline to validate/execute.
• Verify the Info section, the Product AX Search Snap appears with . Make sure the updated FQID and the Snap Pack build number match the Product Snap. 
• The Make sure the the output preview displays the Original data and the result (Key Field and Value) for the Product Snap.The target schema is non suggestible for the Product Read Snap (suggestible for the Field Snap), however, the ID value is passed directly into the Snap or can pass the values via an upstream by enabling the expressions for the Id key and Id value properties in the Snap. 

Microsoft Dynamics AX Update

The Dynamics AX Update Snap Updates an existing record in the Dynamics AX instance.

Refer the Documentation to Dynamics AX Update here to know for more information about the this Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, then go to the Snap in the pipelines  and and configure the new properties as required.
• Verify the Info section, the Product AX Update Snap appears with the updated FQID and the Snap Pack build number.   
• Note to The target schema was suggestible for the Field Snap, but it is not suggestible for the Product Snap. However, the Id value is passed directly into the Snap. Or, values can be passed via an upstream Snap if you enable the expressions for the Id key and Id value properties in the Snap. 
• Make sure to provide the mandatory fields (such as AIF Endpoint, Object Type, ID Key and so on for the pipeline to validate/execute.The , Id key, and Id value) to enable the pipeline to validate/execute.
• Verify the Info section. Make sure the updated FQID and the Snap Pack build number match the Product Snap.
• Make sure the the output preview displays the Original data and the result (Key Field and Value) for  for the Product Snap.

Microsoft Dynamics AX Execute

This Dynamics AX Execute Snap calls the Dynamics AX AIF endpoint using the incoming data and writes out a SOAP response. This is a new Snap in the Product MS Dyamics AX Snap Pack.

Refer the Documentation to Dynamics AX Execute here to know  for more information about the this Product Snap.

Post migration steps:

• Refresh the page after deleting the Field Snap Pack, drag then go to the Snap on in the canvas and pipelines and configure the new properties as required.
• Note to Make sure to provide the mandatory fields (such as AIF WSDL URL, Service, Endpoint, Object TypeOperation, ID Key and so on for and Timeout) to enable the pipeline to validate/execute. 
  

Important Notes

• Reload the Designer page after deleting the Field Snap pack Pack so the latest version is displayed on in the catalog.
• Verify and validate the accounts for all the Snaps.
• Verify the Info section in all the Snaps for the latest FQIDs.  
• Note to Make sure to provide the mandatory fields (such as AIF Endpoint , and Object Type, ID Key and so on for ) to enable the pipeline to validate/execute.