As an Org admin, you can configure Org-wide notifications through Alert/Activity Log Notification to communicate the status of a Snaplex to its users. If a Snaplex fails to communicate with a SnapLogic server for more than 10 minutes, then a notification is sent to the Org administrators per the following example.
The users in your Org may find these notifications useful as they develop and test Pipelines in SnapLogic Designer. You can forward these notifications by email or through Slack.
Recipients can receive notifications for the following events:
Event Type Event Type Specific Parameters Suggested Action for Recipients ACL ACL add Projects to notify: Select the Projects from the drop-down list to which this event applies. Consult your Org admin if you have received this notification. Your access to a project might have changed. ACL remove API Concurrent API usage Threshold: Enter the limit as a percentage of usage allowed. Monitor your usage of APIs. Consult your Org admin if the percentage needs to be increased. Daily API usage Apim Pending subscription API/Proxy to notify: Select a published API Email: Enter the email addresses of the recipients Slack > Channel(s): List the Slack channels Slack > Direct Messag(es): List the Slack recipients. API admin: Select to receive notifications when the APIs you publish on your Org’s Developer Portal have pending subscriptions. When API consumers on the Developer Portal request access to your API for use in their application, you receive the notification at the email or Slack Channe/recipient entered in the notification. Asset Asset create Projects to notify: Select the Projects from the drop-down list to which this event applies. Consult your Org admin if your assets have been deleted moved, renamed, or if ownership has changed without your knowledge. Asset delete Asset move Asset owner change Asset rename Asset update Dist Dist change N/A None: Informational Dist override Dist subscribe Group Group create N/A None: Informational Group create provisioned Group delete Group update Session Session start N/A None: Informational The notification indicates which user (by user email) started or ended a session and the following details about the user: The Org to which the user accessed. The IP address of the user. Session end Sso session start Snaplex Auto scale config update N/A Choose another Snaplex from which to run your Pipelines. Snaplex congestion Snaplex node add Snaplex node connection rejected Snaplex node crash Snaplex node enter maintenance mode Snaplex node leave maintenance mode Snaplex node restart Snaplex version update Snaplex Node Snaplex node cpu load avg CPU utilization: Enter the target threshold for CPU utilization as an integer value. When the CPU usage exceeds this value, a notification is sent. The threshold value setting depends on the server host for the node and might require adjustment. The following example values are based on internal testing. Quad-core machine: Linux machine: Windows machine: Snaplex: Select the target Snaplex from the drop-down list. Email Addresses: Specify the email address of the intended recipients of the event. Run your Pipelines on another Snaplex until more resources are allocated to the Snaplex or activity by other users decreases. Snaplex node disk usage Threshold: Enter this value as the remaining amount of disk space. Make sure you specify the capacity size in GB, MB, KB. When the free space available falls below this value, the alert notification is sent. If the type and name fields are not specified, then the check is done for all mounts, except system mounts: / If the type is specified and not the name, the check is done for all the mounts of the given type. If the name is specified but not the type, the check is done for all the mounts with that given name and all mount types, except system mounts. Run your Pipelines on another Snaplex until more resources are allocated to the Snaplex or activity by other users decreases. Snaplex node memory usage Threshold: Enter the threshold as a percentage of the amount of memory the user is limited to. Snaplex: Select the target Snaplex from the drop-down list. Run your Pipelines on another Snaplex until more resources are allocated to the Snaplex or activity by other users decreases. Task Task execution duration - percentage of normal Threshold: Enter the threshold as a percentage based on the 30-day historical executions. Investigate the following potential issues that could prevent the Task execution from completion: The Snaplex is running low on resources, such as CPU, memory, or network bandwidth. The endpoint that the Pipeline is connecting to is congested or not available. The Pipeline is processing an unusually large number of documents or large-sized documents. Task execution duration - time limit Threshold: Enter the threshold in minutes. Apply to: Select one of the following options. All Tasks: Applies the alert to all Tasks in your Org. Only Infrequent Tasks: Applies the alert only to Tasks that are not run regularly. User Password change N/A Consult your Org admin about your sign-on access. Password reset Password reset link User authentication failure User create User delete User lockout User unlock User update
Recipients: Enter the email addresses of the intended recipients of the event.3
(cores)50
10
Snaplex: Select the target Snaplex from the drop-down list.
Type of the disk space: Enter the filesystem type (NFS, CIFS, TMP).
Name of the disk space: User given name for the space, if any.Usage
proc
, tmpfs
, devtmpfs
, rootfs
.
As you add users to your Org, add them as Org-wide Snaplex notification recipients.
To add recipients:
- Navigate to SnapLogic Manager > Settings, and click Manage Snaplex Notification.
- Enter the information for the following fields, then click Save:
- Email Address(es): Enter the email address for each recipient and then press Enter.
- Slack Channels: Select the Slack Channels from the drop down list.
- Direct Message(s): Select the Slack users from the drop down list.
- Verify that the recipients were added by viewing the list of users under Manage Snaplex Notification button.
You can also remove recipients by placing the cursor over the recipient's name and clicking X.