In this article

Overview

Use this Snap to run multiple child Pipelines through one parent Pipeline.

To execute a SnapLogic Pipeline that is exposed as a REST service, use the REST Get Snap instead.

Key Features

The Pipeline Execute Snap enables you to do the following:

Structure complex Pipelines into smaller segments through child Pipelines.
Initiate parallel data processing using the Pooling option.
Orchestrate data processing across nodes, within the Snaplex or across Snaplexes.
Distribute global values through Pipeline parameters across a set of child Pipeline Snaps.

Supported Modes for Pipelines

Standard mode (default): In the standard mode, a new child Pipeline is started per input document. If you set the pool size to n (where n is any number with the default setting value being 1), then n number of concurrent child Pipelines can run; each child Pipeline processes one document from the parent and then completes.
Reuse mode: In reuse mode, child Pipelines are started and each child Pipeline instance can process multiple input documents from the parent. If you set the pool size to n (default 1), then n number of child pipelines are started and they will process input document in a streaming manner. The child pipeline needs to have an unlinked input view for use in reuse mode.
Reuse mode is more performant, but reuse mode has the restriction that the child pipeline has to be a streaming pipeline.
Replaces Deprecated Snaps

This Snap replaces the ForEach and Task Execute Snaps, as well as the Nested Pipeline mechanism.
Resumable Child Pipeline: Resumable Pipeline does not support the Pipeline Execute Snap. A regular mode pipeline can use the Pipeline Execute Snap to call a Resumable mode pipeline. If the child pipeline is a Resumable pipeline, then the batch size cannot be greater than one.
Works in Ultra Task Pipelines with the following exception: Reusing a runtime on another Snaplex is not supported. See Snap Support for Ultra Pipelines.
Without reuse enabled, the one-in-one-out requirement for Ultra means batching will not be supported. There will be a runtime check which will fail the parent pipeline if the batch size is set greater than 1. This would be similar to the current behavior in DB insert and other snaps in ultra mode.
ELT Mode: A Pipeline can use the Pipeline Execute Snap to call another Pipeline with ELT Snaps only in the standard mode.
Pooling Enabled: The pool size and batch size can both be set to greater than one, in which case the input documents are spread across the child pipeline in a round-robin fashion to ensure that if the child Pipeline is doing any external calls that are slow, then the processing is spread across the children in parallel. The limitation of this option is that the document order is not maintained.

Prerequisites

None.

Limitations

If there are not enough Snaplex nodes to execute the Pipeline on the Snaplex, then the Snap waits until Snaplex resources are available. When this situation occurs, the following message appears in the execution statistics dialog:
Because a large number of Pipeline runtimes can be generated by this Snap, only the last 500 completed child Pipeline runs are saved for inspection in the Dashboard.
The Pipeline Execute Snap cannot exceed a depth of 64 child Pipelines before they begin failing.
Child Pipelines do not display data preview details. You can view the data preview for any child Pipeline when the Pipeline Execute Snap completes execution in the parent Pipeline.
Ultra Pipelines do not support batching.
Unlike the Group By N Snap, when you configure the Batch field, the documents are processed one by one by the Pipeline Execute Snap and then transferred to the child Pipeline as soon as the parent Pipeline receives it. When the batch is over or the input stream ends, the child Pipeline is closed.

Snap Views

Type

Format

Number of Views

Examples of Upstream and Downstream Snaps

Description

Input

Binary or Document

Min:0
Max:1

Mapper Snap
Copy Snap

The document or binary data to send to the child Pipeline.

Output

Binary or Document

Min:0
Max:1

Mapper Snap
Router Snap

If the child Pipeline has an unlinked output, then documents or binary data from that view are passed out of this view.
If the child Pipeline does not have an unlinked view, then output document or binary data is generated for successful runtimes with the run_id field.
Unsuccessful Pipeline runs write a document to the error view. If Reuse executions to process documents is unselected, then the original input document or binary data is added to the output document.

For Pool Size Usage

If the value in the Pool Size field is greater than one, then the order of records in the output is not guaranteed to be the same as that of the input.

Error

Error handling is a generic way to handle errors without losing data or failing the Snap execution. You can handle the errors that the Snap might encounter when running the Pipeline by choosing one of the following options from the When errors occur list under the Views tab:

Stop Pipeline Execution: Stops the current Pipeline execution when the Snap encounters an error.
Discard Error Data and Continue: Ignores the error, discards that record, and continues with the remaining records.
Route Error Data to Error View: Routes the error data to an error view without stopping the Snap execution.

Learn more about Error handling in Pipelines.

Snap Settings

Asterisk ( * ): Indicates a mandatory field.
Suggestion icon (): Indicates a list that is dynamically populated based on the configuration.
Expression icon (): Indicates whether the value is an expression (if enabled) or a static value (if disabled). Learn more about Using Expressions in SnapLogic.
Add icon (): Indicates that you can add fields in the field set.
Remove icon (): Indicates that you can remove fields from the field set.

Field Name		Field Type	Description
Label* Default Value: Pipeline Execute Example:ExecuteCustomerUpdatePipeline		String	Specify a name for the Snap. You can modify this to be more specific, especially if you have more than one of the same Snap in your pipeline.
Pipeline* Default Value: N/A Example: NetSuite-Create-Credit-Memo		String/Expression	Specify the absolute or relative (expression-based) path of the child Pipeline to run. If you only specify the Pipeline name, the Snap searches for the Pipeline in the following folders in this order: Current project Shared project-space Shared folder of the Org You can specify the absolute path to the target project using the Org/project_space/project notation. You can also dynamically choose the Pipeline to run by entering an expression in this field when Expression enabled. For example, to run all of the Pipelines in a project, you can connect the SnapLogic List Snap to this Snap to retrieve the list of Pipelines in the project and run each one.
Execute On Default Value: SNAPLEX_WITH_PATH Example: groundplex4-West		Dropdown list	Select the one of the following Snaplex options to specify the target Snaplex for the child Pipeline: SNAPLEX_WITH_PATH. Runs the child Pipeline on a user-specified Snaplex. When you choose this option, the Snaplex Path field appears. LOCAL_NODE. Runs the child Pipeline on the same node as the parent Pipeline. LOCAL_SNAPLEX. Runs the child Pipeline on one of the available nodes in the same Snaplex as the parent Pipeline.	Best Practices When choosing which Snaplex to run, always consider first the LOCAL_NODE option. With this selection, the child Pipeline runtime occurs on the same Snaplex node as that of the parent Pipeline. Due to absence of network traffic required to start the child Pipeline on another node, having the runtime on the same node makes the execution faster and more reliable. In both of these cases, you do not need to set an Org-specific property. This scenario facilitates usage for the user importing the Pipeline. However, if you do need to run the child Pipeline on a different Snaplex than the parent Pipeline, then select SNAPLEX_WITH_PATH and enter the target Snaplex name. In this case, you can take advantage of the following strategies: Use a relative path for the Snaplex name and try to use the same Snaplex names in your development, QA, stage, or production Orgs. For example, if the Snaplex property is set to cloud, the Pipeline is run on the Snaplex named cloud in the shared directory of the current Org. Use a Pipeline parameter or expression library 1 to specify the path to the Snaplex. For complicated setups, you might want to create an expression library file that contains the details of the environment and import that into the Pipeline. In this model, each Org would have its own version of the library with the appropriate settings for the environment. The Pipeline can then be moved around to each Org without needing to be updated. Ultra Pipelines We do not recommend using the `pipe.plexPath` setting for Ultra Pipelines, since requests should be processed quickly and sending an execution to another node can be resource-intensive and thus costly.
Snaplex Path Default Value:N/A Example: DevPlex-1		String/Expression	Appears when you select SNAPLEX_WITH_PATH* option for Execute On.* Enter the name of the Snaplex on which you want the child Pipeline to run. Click to select from the list of Snaplex instances available in your Org. If you do not provide a Snaplex Path, then by default, the child Pipeline runs on the same node as the parent Pipeline.
Execution Label Default Value: N/A Example: NetSuite-Create-Credit-Memo		String/Expression	Specify the label to display in the Pipeline view of the Dashboard. You can use this field to differentiate one Pipeline execution from another.
Pipeline Parameters	Use this field set to define the Pipeline Parameters for the Pipeline selected in the Pipeline field. When you select Reuse executions to process documents, you cannot change parameter values from one Pipeline invocation to the next.
	Parameter Name Default Value: N/A Example: Postal_Code	Suggestion	Enter the name of the parameter. You can select the Pipeline Parameters defined for the Pipeline selected in the Pipeline field.
	Parameter Value Default Value: N/A Example:94402	String/Expression	Enter the value for the Pipeline Parameter, which can be an expression based on incoming documents or a constant. If you configure the value as an expression based on the input, then each incoming document or binary data is evaluated against that expression when invoking the Pipeline. The result of the expression is JSON-encoded if it is not a string. The child Pipeline then needs to use the `JSON.parse()` expression to decode the parameter value. When Reuse executions to process documents is enabled, the parameter values cannot change from one invocation to the next.
Reuse executions to process documents Default Value: Deselected		Checkbox	Select this option to start a child Pipeline and pass multiple inputs to the Pipeline. Reusable executions continue to live until all of the input documents to this Snap have been fully processed. When you select this option and the Pipeline parameters use expressions, the expressions are evaluated using the first document. The parameter value in the child Pipeline does not change across documents. If you do not select this option, then a new Pipeline execution is created for each input document. The Reuse mode does not support the Batch Size option.
Batch size* Default Value: 1 Example: 2 _BATCH_SIZE		Integer/Expression	Specify the number of input documents to be processed by each child execution. If Batch Size is set to N, then N input documents are sent to each child Pipeline that is started. After the Snap receives N documents, the child Pipeline input view is closed until the child Pipeline completes its execution. The output of the child Pipeline (one or more documents) passes to the Pipeline Execute output view. New child Pipelines are started after the original Pipeline completes its execution. The Batch Size field is not displayed if Reuse executions to process documents is selected. This feature is incompatible with reusable executions.
Pool Size Default Value: 1 Example: 4		Integer/Expression	Enter multiple input documents or binary data to be processed concurrently by specifying an execution pool size. When the pool size is greater than one, then the Snap starts Pipeline executions as needed for up to the specified pool size. When you select Reuse executions to process documents, the Snap starts a new execution only if all executions are busy working on documents or binary data and the total number of executions is below the pool size.
Timeout Default Value: N/A Example:10		Integer/Expression	Enter the maximum number of seconds for which the Snap must wait for the child Pipeline to complete the runtime. If the child Pipeline does not complete the runtime before the timeout, the execution process stops and is marked as failed.
Retry limit Default Value: N/A Example: 3		Integer/Expression	Enter the maximum number of retry attempts that the Snap must make in the case of a network failure. If the child pipeline does not execute successfully, an error document is written to the error view. This feature is incompatible with reusable executions. Retry is not supported if the input view is a Binary data type.
Retry interval Default Value: N/A Example: 10		String/Expression	Enter the minimum number of seconds that the Snap must wait between two retry requests. A retry happens only when the previous attempt results in an error. This feature is incompatible with reusable executions. Retry is not supported if the input view is a Binary data type.
Snap Execution Default Value: Validate & Execute Example: Execute only		Dropdown list	Select one of the three modes in which the Snap executes. Available options are: Validate & Execute: Performs limited execution of the Snap, and generates a data preview during Pipeline validation. Subsequently, performs full execution of the Snap (unlimited records) during Pipeline runtime. Execute only: Performs full execution of the Snap during Pipeline execution without generating preview data. Disabled: Disables the Snap and all Snaps that are downstream from it.

Guidelines for Child Pipelines

No unlinked binary input or output views. When you enter an expression in the Pipeline field, the Snap needs to contact the SnapLogic cloud servers to load the Pipeline runtime information. Also, if Reuse executions to process documents is enabled, the result of the expression cannot change between documents.
When reusing Pipeline executions, there must be one unlinked input view and zero or one unlinked output view.
If you do not enable Reuse executions to process documents, then use at most one unlinked input view and one unlinked output view.
If the child Pipeline has an unlinked input view, make sure the Pipeline Execute Snap has an input view because the input document or binary data is fed into the child Pipeline.
If you rename the child Pipeline, then you must manually update the reference to it in the Pipeline field; otherwise, the connection between child and parent Pipeline breaks.
The child Pipeline is executed in preview mode when the Pipeline containing the Pipeline Execute Snap is saved. Consequently, any Snaps marked not to execute in preview mode are not executed and the child Pipeline only processes 50 documents.
You cannot have a Pipeline call itself: recursion is not supported.

Schema Propagation Guidelines

If the child Pipeline has a Snap that supports schema suggest, such as the JSON Formatter Snap or MySQL Insert Snap, then the schema is back propagated to the parent Pipeline. This configuration is useful in mapping input values in the parent Pipeline to the corresponding fields in the child Pipeline using a Mapper Snap in the parent Pipeline.
For the schema suggest to work, the parent Pipeline must be validated first; only then is the schema from the child Pipeline visible in the parent Pipeline.
The Pipeline Execute Snap is capable of propagating schema in both directions: upstream as well as downstream. See the example Schema Propagation in Parent Pipeline – 3.
For a child Pipeline to run on a Snaplex node, memory is prioritized over slots. That means, irrespective of the node a parent Pipeline runs, the child Pipeline runs on a node within 10% memory utilization.
Difference between how a local node and a Snaplex run the child Pipeline:
SNAPLEX_WITH_PATH: Runs the child Pipeline on a user-specified Snaplex. When you select this option, the Snaplex Path field appears.
LOCAL_NODE: Runs the child Pipeline on the same node as the parent Pipeline.
LOCAL_SNAPLEX: Runs the child Pipeline on one of the available nodes in the same Snaplex as the parent Pipeline.

Ultra Mode Compatibility

If you selected Reuse executions to process documents for this Snap in an Ultra Pipeline, then the Snaps in the child Pipeline must also be Ultra-compatible.
If you need to use Snaps that are not Ultra-compatible in an Ultra Pipeline, you can create a child Pipeline with those Snaps and use a Pipeline Execute Snap with Reuse executions to process documents disabled to invoke the Pipeline. Since the child Pipeline is executed for every input document, the Ultra Pipeline restrictions do not apply.
For example, if you want to run an SQL Select operation on a table that would return more than one document, you can put a Select Snap followed by a Group By N Snap with the group size set to zero in a child Pipeline. In this configuration, the child Pipeline performs the select operation during execution, and then the Group By Snap gathers all of the outputs into a single document or as binary data. That single output document or binary data can then be used as the output of the Ultra Pipeline.

Creating a Child Pipeline by Accessing Pipelines in the Pipeline Catalog in Designer

You can now browse the Pipeline Catalog for the target child Pipeline, and then select, drag and drop it in the Canvas. The SnapLogic Designer automatically adds the child Pipeline using a Pipeline Execute Snap.

Likewise, you can preview a child Pipeline by hovering over a Pipeline Execute Snap while the parent Pipeline is open on the Designer Canvas.

Returning Child Pipeline Output to the Parent Pipeline

A common use case for the Pipeline Execute Snap is to run a child Pipeline whose output is immediately returned to the parent Pipeline for further processing. You can achieve this return with the following Pipeline design for the child Pipeline.

In this example, the document in this child Pipeline is sent to the parent Pipeline through output1 of the Copy Snap. Any unconnected output view is returned to the parent Pipeline. You can use any Snap that completes execution in this way.

Execution States

When a Pipeline Execute Snap activates its child Pipeline, you can view the status as it executes on the SnapLogic Designer canvas.

A child Pipeline also reports its execution to the parent Pipeline.

In the IIP Dashboard , you can hover over the status shown in the Status column for a pipeline with a Pipeline Execute Snap, and the following messages are displayed for the following scenarios:
- If the parent Pipeline has the status Failed shown in the Status column, then the following message is displayed: One of the child Pipelines Failed.
- If the parent Pipeline has the status Completed with Errors shown in the Status column, the following message is displayed: One of the child Pipelines completed with Errors.
In Monitor, find the parent Pipeline in the Execution overview screen. Expand it to view child Pipelines and their status. Click a Pipeline to view the Snap details. Execution overview search options do not include the Completed with Warnings status.

These execution state messages apply even when the child Pipeline does not appear on the Dashboard because of child Pipeline execution limits.

Examples

Run a Child Pipeline Multiple Times

The PE_Multiple_Executions project demonstrates how you can configure the Pipeline Execute Snap to execute a child Pipeline multiple times. The project contains the following Pipelines:

PE_Multiple_Executions_Child: A simple child Pipeline that writes out a document with static string and the number of input documents received by the Snap.
PE_Multiple_Executions_NoReuse_Parent: A parent Pipeline that executes the PE_Multiple_Executions_Child Pipeline five times. You can save the Pipeline to examine the output documents. Note that the output contains a copy of the original document and the $inCount field is always set to one because the Pipeline was separately executed five times.
PE_Multiple_Executions_Reuse_Parent: A parent Pipeline that executes the PE_Multiple_Executions_Child Pipeline once and feeds the child Pipeline execution five documents. You can save the Pipeline to examine the output documents. Note that the output does not contain a copy of the original document and the $inCount field goes up for each document since the same Snap instance is being used to process each document.
PE_Multiple_Executions_UltraSplitAggregate_Parent: A parent Pipeline that is an example of using Snaps that are not Ultra-compatible in an Ultra Pipeline. This Pipeline can be turned into an Ultra Pipeline by removing the JSON Generator Snap at the head of the Pipeline and creating an Ultra Task.
PE_Multiple_Executions_UltraSplitAggregate_Child: A child Pipeline that splits an array field in the input document and sums the values of the $num field in the resulting documents.

Propagate a Schema Backward

The project, PE_Backward_Schema_Propagation_Contacts, demonstrates the schema suggest feature of the Pipeline Execute Snap. It contains the following files:

PE_Backward_Schema_Propagation_Contacts_Parent
PE_Backward_Schema_Propagation_Contacts_Child
contact.schema (Schema file)
test.json (Output file)

The parent Pipeline is shown below:

The child Pipeline is as shown below:

The Pipeline Execute Snap is configured as:

The following schema is provided in the JSON Formatter Snap. It has three properties - $firsName, $lastName, and $age. This schema is back propagated to the parent Pipeline.

The parent Pipeline must be validated in order for the child Pipeline's schema to be back-propagated to the parent Pipeline. Below is the Mapper Snap in the parent Pipeline:

Notice that the Target Schema section shows the three properties of the schema in the child Pipeline:

Upon execution the data passed in the Mapper Snap will be written into the test.json file in the child Pipeline. The exported project is available in the Downloads section below.

Propagate Schema Backward and Forward

The project, PE_Backward_Forward_Schema_Propagation, demonstrates the Pipeline Execute Snap's capability of propagating schema in both directions – upstream as well as downstream. It contains the following Pipelines:

PE_Backward_Forward_Schema_Propagation_Parent
PE_Backward_Forward_Schema_Propagation_Child

The parent Pipeline is as shown below:

The Pipeline Execute Snap is configured to call the Pipeline schema-child. This child Pipeline consists of a Mapper Snap that is configured as shown below:

The Mapper Snaps upstream and downstream of the Pipeline Execute Snap: Mapper_InputSchemaPropagation, and Mapper_TargetSchemaPropagation are configured as shown below:

When the Pipeline is executed, data propagation takes place between the parent and child Pipeline:

The string expression $foo is propagated from the child Pipeline to the Pipeline Execute Snap.
The Pipeline Execute Snap propagates it to the upstream Mapper Snap (Mapper_InputSchemaPropagation), as visible in the Target Schema section. Here it is assigned the value 123.
This is passed from the Mapper to the Pipeline Execute Snap that internally passes the value to the child Pipeline. Here $foo is mapped to $bar. $baz is another string expression in the child Pipeline (assigned the value 2).
$bar, and $baz are propagated to the Pipeline Execute Snap and propagated forward to the downstream Mapper Snap (Mapper_TargetSchemaPropagation). This can be seen in the Input Schema section of the Mapper Snap.

Migrating from Legacy Nested Pipelines

The Pipeline Execute Snap can replace some uses of the Nested Pipeline mechanism as well as the ForEach and Task Execute Snaps. For now, this Snap only supports child Pipelines with unlinked document views (binary views are not supported). If these limitations are not a problem for your use case, read on to find out how you can transition to this Snap and the advantages of doing so.

Nested Pipeline

Converting a Nested Pipeline will require the child Pipeline to be adapted to have no more than a single unlinked document input view and no more than a single unlinked document output view. If the child Pipeline can be made compatible, then you can use this Snap by dropping it on the canvas and selecting the child Pipeline for the Pipeline property. You will also want to enable the Reuse property to preserve the existing execution semantics of Nested Pipelines. The advantages of using this Snap over Nested Pipelines are:

Multiple executions can be started to process documents in parallel.
The Pipeline to execute can be determined dynamically by an expression.
The original document or binary data is attached to any output documents or binary data if reuse is not enabled.

ForEach

Converting a ForEach Snap to the Pipeline Execute Snap is pretty straightforward since they have a similar set of properties. You should be able to select the Pipeline you would like to run and populate the parameter listing. The advantages of using this Snap over the ForEach Snap are:

Documents or binary data fed into the Pipeline Execute Snap can be sent to the child Pipeline execution through an unlinked input view in the child.
Documents or binary data sent out of an unlinked output view in the child Pipeline execution is written out of the Pipeline Execute's output view.
The execution label can be changed.
The Pipeline to execute can be determined dynamically by an expression.
Executing a Pipeline does not require communication with the cloud servers.

Task Execute

Converting a Task Execute Snap to the Pipeline Execute Snap is also straightforward since the properties are similar. To start, you only need to select the Pipeline you would like to use, you no longer have to create a Triggered Task. If you set the Batch Size property in the Task Execute to one, then you will not want to enable the Reuse property. If the Batch Size was greater than one, then you should enable Reuse. The Pipeline parameters should be the same between the Snaps. The advantages of using this Snap over the Task Execute Snap are:

A task does not need to be created.
Multiple executions can be started to process documents in parallel.
There is no limit on the number of documents that can be processed by a single execution (that is, no batch size).
The execution label can be changed.
The Pipeline to execute can be determined dynamically by an expression.
The original document will be attached to any output documents if reuse is not enabled.
Executing a Pipeline does not require communication with the cloud servers.

"Auto" Router

Converting a Pipeline that uses the Router Snap in "auto" mode can be done by moving the duplicated portions of the Pipeline into a new Pipeline and then calling that Pipeline using a Pipeline Execute. After refactoring the Pipeline, you can adjust the "Pool Size" of the Pipeline Execute Snap to control how many operations are done in parallel. The advantages of using this Snap over an "Auto" Router are:

De-duplication of Snaps in the Pipeline.
Adjusting the level of parallelism is trivially done by changing the Pool Size value.

Downloads

Important Steps to Successfully Reuse Pipelines

Download the zip files, extract the files, and import the Pipelines into SnapLogic.
Configure Snap accounts as applicable.
Provide Pipeline parameters as applicable.

	File	Modified

No files shared here yet.

Snap Pack History

Click to view/expand

Release	Snap Pack Version	Date	Type	Updates
August 2024	438patches28470	22 Oct 2024	Latest	Added the PipeLoop Snap that enables you to loop on pipeline executions based on a stop condition or iteration limit. The execution workflow of this Snap enables the parent pipeline to control and manage iterative processes using the child pipeline, for scenarios where repeated processing is needed until a specific stop condition is met.
August 2024	438patches28047	16 Sep 2024	Latest	Enhanced the Head and Tail Snaps (for the Number of documents and Document offset fields) to support pipeline parameters via expressions that enable you to reuse the pipelines.
August 2024	main27765	21 Aug 2024	Stable	When the Router Snap was the first Snap in a triggered task, the documents were not processed. Previously, the response contained a `200 status code` but was empty. Now, it processes one document and provides non-empty output. Behavior change: Previously, the Router Snap generated no output without an input document. Now, the Snap generates an empty document when no input document is provided.
May 2024	437patches26857	10 Jul 2024	Latest	Enhanced the Pipeline Execute Snap to support expression values via pipeline parameters for the Batch size field that enables you to use intermediate pipelines for generic use cases.
May 2024	main26341	08 May 2024	Stable	Updated and certified against the current SnapLogic Platform release.
March 2024	436patches25576	19 Mar 2024	Latest	Fixed an issue with the Pipeline Execute Snap where a condition resulted in the output documents not being read.
February 2024	main25112	14 Feb 2024	Stable	Updated and certified against the current SnapLogic Platform release.
November 2023	main23721	08 Nov 2023	Stable	Updated and certified against the current SnapLogic Platform release.
August 2023	434patches22576	23 Aug 2023	Latest	Fixed an issue with the Pipeline Execute Snap that caused a null pointer exception during the retry when the input view was a Binary type. Retry is not supported for a Binary input view with this Snap.
August 2023	main22460	16 Aug 2023	Stable	Updated and certified against the current SnapLogic Platform release.
May 2023	433patches22107	08 Aug 2023	Latest	Fixed an issue with the Pipeline Execute Snap that caused it to acknowledge the Ultra pipeline message before the message reached the last Snap in the pipeline. Because of the early acknowledgment, the last Snap in the pipeline failed and the response could not be sent back.
May 2023	433patches21744	28 Jun 2023	Latest	Fixed an issue with the Pipeline Execute Snap where a missing label produced a null pointer exception.
May 2023	433patches21196	25 May 2023	Latest	Fixed an issue with the Pipeline Execute Snap where no input view produced a null pointer exception.
May 2023	433patches21040	15 May 2023	Latest	Provided a fix to ensure the Data Validator works with "unknown" data types.
May 2023	main21015	10 May 2023	Stable	Upgraded with the latest SnapLogic Platform release.
February 2023	432patches20279	29 Mar 2023	Latest	The Pipeline Execute Snap now returns errors from child pipelines with a unique identifier.
February 2023	432patches19695	07 Mar 2023	Latest	Fixed an issue with the Pipeline Execute Snap that was causing `Unable to create a deep copy of the object` errors. As of 29 Mar 2023 we have discovered an issue with this patch affecting the Pipeline Execute Snap. If you have pipelines leveraging the Pipeline Execute Snap, we recommend you NOT use this patch and instead use patch 432patches20279.
February 2023	main19844	09 Feb 2023	Stable	Upgraded with the latest SnapLogic Platform release.
November 2022	main18944	10 Nov 2022	Stable	Upgraded with the latest SnapLogic Platform release.
September 2022	430patches18070	22 Sep 2022	Latest	The Pipeline Execute Snap with binary output that is used in a low-latency feed Ultra Pipeline now works as expected. The requests are now acknowledged correctly.
August 2022	main17386	11 Aug 2022	Stable	Upgraded with the latest SnapLogic Platform release.
4.29	main15993	14 May 2022	Stable	Upgraded with the latest SnapLogic Platform release.
4.28 Patch	428patches15026	22 Mar 2022	Latest	Fixed an issue with HTTP Router Snap where the Snap did not work as intended for a GET request that used a Cloud URL when the HTTP Router was the first Snap in the triggered task Pipeline.
4.28	main14627	12 Feb 2022	Stable	Enhanced the Filter Snap with the Null-safe access checkbox. Select this checkbox to consider the valid values in the filter expression and remove the missing or empty data instead of treating them as null.
4.27 Patch	427patches13726	18 Jan 2022	Latest	Enhanced the Filter Snap with the Null-safe access checkbox. Select this checkbox to consider the missing data or empty value as null when accessing the source path.
4.27	main12833	13 Nov 2021	Stable	Enhanced the Gate Snap with the Output Document Content field that enables you to indicate the count of input documents and the specific (first or last) document to include in the output.
4.26	main11181	14 Aug 2021	Stable	Added Binary Copy Snap to copy a binary stream to the Snap’s output views. You can use this Snap if you want to send the same information to multiple endpoints.
4.25 Patch	425patches10571	08 Sep 2021	Latest	Enhanced the performance of Binary Router Snap via more efficient IO utilization.
4.25	main9554	08 May 2021	Stable	Enhanced the HTTP Router Snap to support Ultra Pipelines.
4.24	main8556	13 Feb 2021	Stable	Added the Ignore empty stream checkbox to the Gate Snap Settings
4.23	main7430	14 Nov 2020	Stable	Enhances the Data Validator Snap by making the Constraint value field as optional under the Constraints.
4.22	main6403	12 Sep 2020	Stable	Upgraded with the latest SnapLogic Platform release.
4.21 Patch	flow8855	-	Latest	Fixes the Binary Router Snap's failure in Ultra Pipelines by preventing a deep-copy (performing a copy of the original objects recursively) of binary data headers.
4.21	snapsmrc542	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.20	snapsmrc535	-	Latest	Adds a new Snap, Gate, which enables you to consolidate multiple input streams into a single output document where each input stream is displayed as a label containing the list of records that were received by that input view. The Pipeline Execute Snap now provides the following capabilities: Specify the Snaplex on which to run child Pipelines. You can now select the Snaplex on which to run the child Pipelines through the Execute On and Snaplex Path fields. The default option is executing the child Pipeline on the same Snaplex node as the Parent, but you can also specify a different Snaplex through the drop-down list, which includes the option to manually enter a Snaplex name. Configure retry logic for child Pipeline executions. You can now configure retry logic for child Pipeline executions though the following fields: Number of Retries, Retry Interval, and Timeout fields.
4.19	snaprsmrc528	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.18 Patch	flow7743	-	Latest	Added a property Validate full JSON path to the Data Validator Snap to fix an issue wherein a field validation failure against a constraint does not produce an error.
4.18	snapsmrc523	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.17 Patch	flow7637	-	Latest	Fixed an issue with the Data Validator Snap wherein the output fails to report all but one of the violations when there are multiple constraints of the Required type.
4.17 Patch	ALL7402	-	Latest	Pushed automatic rebuild of the latest version of each Snap Pack to SnapLogic UAT and Elastic servers.
4.17	snapsmrc515	-	Latest	Added the Snap Execution field to all Standard-mode Snaps. In some Snaps, this field replaces the existing Execute during preview check box.
4.16	snapsmrc508	-	Latest	Pipeline Execute Snap: Added the capability to select either document (previously supported) or binary data (new) for your input and output Views.
4.15 Patch	flow6263	-	Latest	Improved the error messages to include the source path of the constraint for data validation failures.
4.15	snapsmrc500	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.14	snapsmrc490	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.13	snapsmrc486	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.12 Patch	flow4895	-	Latest	Fixed an issue in the Data Validator Snap that made multiple copies of lineage on the error path.
4.12	snapsmrc480	-	Stable	Resolved an issue with the Union Snap that caused excessive CPU utilization.
4.11 Patch	flow4461	-	Latest	Fixed an issue with the Pipeline Execute Snap that could cause the parent pipeline to freeze when the child pipeline fails.
4.11 Patch	flow4292	-	Latest	Resolved an issue with the Union Snap in Ultra Mode that spikes the CPU utilization to ~30% during startup of 120 instances.
4.11	snapsmrc465	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.10	snapsmrc414	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.9.0 Patch	flow3094	-	Latest	Addressed an issue in Binary Router where the Snap did not wait until all threads were completed to write data to the output views.
4.9.0 Patch	flow3320	-	Latest	Data Validator Snap - fixed Type constraint feature.
4.9	snapsmrc405	-	Stable	Upgraded with the latest SnapLogic Platform release.
4.8.0	snapsmrc398		Stable	Filter: Snap-aware error handling policy enabled for Spark mode. This ensures the error handling specified on the Snap is used.
4.7.0 Patch	flow2598		Latest	Addressed a possible race condition when reusing pipelines with a Pipeline Execute Snap.
4.7.0	flow2297		Stable	Fixed an issue with Ultra pipeline when invoking, using Pipeline Execute, a child pipeline that contains a non-Ultra compatible Snap.
4.7.0	snapsmrc382		Stable	Recommendation: The Pipeline Execute Snap is meant to eventually replace ForEach and Task Execute. It is suggested you use Pipeline Execute for all new pipelines and update existing pipelines at your earliest convenience. Updated the Pipeline Execute Snap with Execute during preview field.
4.6.0 Patch	flow1909		Latest	Resolved an issue with Union Snap slowing down pipelines.
4.6.0	snapsmrc362		Stable	The following Snaps now support error view in Spark mode: Copy, Union. ForEach: The value for the Maximum instances property is limited to a maximum of 100. A value higher than 100 will automatically be limited down to 100 during pipeline execution. Pipeline Execute: Snaplex property added to let you specify the Snaplex on which to run the child pipeline. Resolved an issue in Task Execute Snap that caused an internal server error (status code: 500). Resolved an issue in Pipeline Execute Snap that did not show parameter suggestions when the pipeline is selected from another project. Resolved an issue in Copy Snap that showed errors on the UI while the Javascript was being executed. Resolved an issue in Filter Snap that failed with "could not filter the document" if upstream data for ServiceNow Query.
4.5.1	flow1574		Latest	Resolved an issue with Pipeline Execute not able to load pipeline selected from the pipeline picker property. Enhanced error handling in Pipeline Execute for when Reuse is enabled and the pipeline path is an expression whose result is not constant. Resolved an issue in Pipeline Execute not including the runtime ID and state in error documents.
4.5.0	snapsmrc344		Stable	NEW! Pipeline Execute introduced in this release. This Snap provides a way to flexibly and efficiently execute pipelines and flowing documents into and out of these executions. Resolved an issue in Task Execute Snap to ensure JAVA 7 and JAVA 8 Snaplex give the same output. Resolved an issue with the Router Snap routing to the wrong output when used in Spark mode
4.4.0			Stable	Resolved an issue with Exit Snap hanging during validation if threshold is not met. Spark support added to the Copy, Filter, Router, and Union Snaps.
4.3.2			Latest	Resolved an issue with Task Execute where java.math.BigInteger cannot be cast to java.lang.String exception if input document variable was a numeric type. Resolved an issue with Task Execute failing with expression enabled. Resolved an issue with data preview not working in the ForEach Snap. Resolved an issue with Execute during Preview functionality broken in the ForEach Snap. Resolved an issue with ForEach Snap not representing the output schema correctly during preview.
4.3.1			Latest	Resolved an issue with the ForEach poll interval being inconsistent.
4.3.0			Stable	In Data Validator, the pattern option now works with partial matches. Exit Snap Error handling improved to handle messages that are non-strings. Exit Snap now supports expressions in the Exit error message property. ForEach Snap now generates output documents when run. Output documents will also be produced if a child pipeline called by the ForEach is manually stopped.
4.2.2			Latest	Resolved an issue in ForEach where a recursive pipeline in synchronous mode was unable to finish execution. Resolved an issue in Data Validator not working for partial matches.
		August 7, 2015 (2015.25/4.2.1)		NEW! Exit Snap introduced in this release. This Snap forces a pipeline to stop with a failed status if it receives more records than the user-defined threshold. Resolved error in ForEach Snap where an exposed error view triggered a pipeline failure.
		June 27, 2015 (2015.22)		The Router Snap now supports even distribution across all output views if no expressions are defined. With this change, Routes is no longer a required field.
		June 6, 2015 (2015.20)		Task Execute should have Execute on preview Directory Browser Snap did not render output data when running from "Windows" Groundplex.
		May 15, 2015		ForEach: Error was not thrown on validation if the child pipeline was not provided.
		May 2, 2015		Binary Router: enhanced error handling Filter: bug fixes Router: bug fixes
		December 20, 2014		Updated Snaps may include new or changed functionality or be otherwise improved. Data Validator: Type constraint added. Union Snap: Preserve order was removed.
		July/Summer 2014		NEW! Binary Router Snap introduced in this release. NEW! Task Execute Snap introduced in this release.
		June 30, 2014		Data Validator (Beta Release). This Snap validates incoming documents and their attributes against constraints you define. ForEach: Addressed an issue with parallel execution not working properly.
		April 2014		ForEach Snap updated to support Snaplex selection and pipeline parameters.
		January 2014		NEW! ForEach Snap introduced in this release.
		November 2013		NEW! Head Snap introduced in this release. NEW! Tail Snap introduced in this release.
		Initial Release (June 2013)		Router Snap introduced in this release. Copy Snap introduced in this release. Union Snap introduced in this release. Filter Snap introduced in this release.