Configuring Eloqua Accounts

In this article

Overview

You must configure Eloqua accounts to enable Eloqua Snaps to connect to Eloqua instances.

See Accounts to learn more about SnapLogic Accounts.

You can configure Eloqua accounts in SnapLogic using either the Designer or Manager.

Using SnapLogic Designer

  1. Log in to Snaplogic to open the Designer.

  2. Drag an Eloqua Snap to the canvas.

  3. Click the Snap to open the Snap's settings.

  4. Click the Account tab.



  5. Select the account that you want to use from the Account Reference drop-down list, or click Add Account to create a new account.



    The account types that are compatible with the selected Snap appear under Account Type. For details about Snaps and compatible Account types, see Snap Compatibility.

  6. Select the location where you want to create the account, and then select the account type.

  7. Click Continue to open the account Settings.

  8. Enter the required account details. For detailed guidance on how to provide information associated with each account type, use the following links:

  9. Optionally, enter additional information on this account in the Notes field of the Info tab.

  10. Click Validate to verify the account information, if applicable. 

  11. Click Apply to complete configuring the Eloqua account.

Using SnapLogic Manager

  1. Log in to Snaplogic. Click the Manager tab.

  2. Navigate to the project with which you want to associate the new account. Click  > Account Eloqua, followed by the appropriate account type.



    The Create Account page associated with the selected account type appears.

  3. In Settings, enter the required account details. For detailed guidance on how to provide information associated with each account type, use the following links:
  4. Optionally, enter additional information on this account in the Notes field of the Info tab.

  5. Click Validate to verify the account information, if applicable.

  6. Click Apply to complete configuring the Eloqua account.

You should avoid updating the account credentials while Pipelines using that account are being executed. This may lead to unexpected results, including locking your Eloqua account.



 Click to view/expand
Release Snap Pack VersionDateType  Updates
August 2024main27765 StableUpdated and certified against the current SnapLogic Platform release.
May 2024main26341 StableUpdated and certified against the current SnapLogic Platform release.
February 2024main25112 StableUpdated and certified against the current SnapLogic Platform release.
November 2023main23721 StableUpdated and certified against the current SnapLogic Platform release.

August 2023

main22460

 

Stable

Updated and certified against the current SnapLogic Platform release.

May 2023main21015 StableUpgraded with the latest SnapLogic Platform release.
February 2023main19844 StableUpgraded with the latest SnapLogic Platform release.
November 2022main18944 Stable

The Eloqua Snaps now include the Pass through checkbox, which enables the Snap to pass the input document to the output view under the key original.

August 2022430patches17270 Latest

The Custom Object Metadata ID field in the Eloqua Create Snap allows you to specify an ID for creating custom object data. This conditional field appears only when you select Custom Object Data as the Core object type.

August 2022main17386 StableUpgraded with the latest SnapLogic Platform release.
4.29main15993 StableUpgraded with the latest SnapLogic Platform release.
4.28main14627 StableUpgraded with the latest SnapLogic Platform release.

4.27

main12833

 

Stable

Upgraded with the latest SnapLogic Platform release.
4.26main11181 StableUpgraded with the latest SnapLogic Platform release.
4.25main9554
 
StableUpgraded with the latest SnapLogic Platform release.
4.24main8556
StableUpgraded with the latest SnapLogic Platform release.
4.23main7430
 
StableUpgraded with the latest SnapLogic Platform release.
4.22main6403
 
StableUpgraded with the latest SnapLogic Platform release.
4.21snapsmrc542

 

StableUpgraded with the latest SnapLogic Platform release.
4.20snapsmrc535
 
StableUpgraded with the latest SnapLogic Platform release.
4.19snaprsmrc528
 
StableUpgraded with the latest SnapLogic Platform release.
4.18snapsmrc523
 
StableUpgraded with the latest SnapLogic Platform release.
4.17ALL7402
 
Latest

Pushed automatic rebuild of the latest version of each Snap Pack to SnapLogic UAT and Elastic servers.

4.17snapsmrc515
 
Latest

Added the Snap Execution field to all Standard-mode Snaps. In some Snaps, this field replaces the existing Execute during preview check box.

4.16snapsmrc508
 
StableUpgraded with the latest SnapLogic Platform release.
4.15snapsmrc500
 
StableUpgraded with the latest SnapLogic Platform release.
4.14snapsmrc490
 
StableUpgraded with the latest SnapLogic Platform release.
4.13

snapsmrc486

 
StableUpgraded with the latest SnapLogic Platform release.
4.12

snapsmrc480

 
StableUpgraded with the latest SnapLogic Platform release.
4.11snapsmrc465
 
StableUpgraded with the latest SnapLogic Platform release.
4.10

snapsmrc414

 
StableUpgraded with the latest SnapLogic Platform release.
4.9snapsmrc405
 
StableUpgraded with the latest SnapLogic Platform release.
4.8

snapsmrc398

 
StableUpgraded with the latest SnapLogic Platform release.
4.7

snapsmrc382

 
StableUpgraded with the latest SnapLogic Platform release.
4.6snapsmrc362
 
StableUpgraded with the latest SnapLogic Platform release.
4.5.1

snapsmrc344

 
LatestUpgraded with the latest SnapLogic Platform release.
4.5

snapsmrc344

 StableUpgraded with the latest SnapLogic Platform release.
4.4.1N/A LatestUpgraded with the latest SnapLogic Platform release.
4.4N/A StableUpgraded with the latest SnapLogic Platform release.
4.3.2N/A Latest
  • NEW! Create, Delete, Query Activities, and Update Snaps added.
  • Added core object types to support all remaining REST 1.0 and 2.0 endpoints in Read and Query Snaps.
  • Read Snap now supports expressions for Search setting and an input view.
  • Resolved an issue with Eloqua Snaps not correctly obtaining the base URL from the login id endpoint.
  • Resolved an issue with Eloqua Snaps not handling Additional Parameters correctly.
  • Resolved an issue with Eloqua Read settings listing core object types that aren't applicable for this Snap and will always fail.
  • Resolved an issue with Eloqua Read and Query Snap not able read or query External Asset object type.
  • Resolved an exception with Eloqua Query when Activities returns no content.
  • Resolved an exception with Eloqua Query when Activities returns content.
  • Resolved an issue with Eloqua Read returning duplicate items when Count was greater than 1000.